Evian vs San Benedetto: Mineral Content, pH and Taste Compared
Evian is a still spring water from Evian-les-Bains, Haute Savoie, France. Its total dissolved solids are 345 mg/L, which is medium minerality. Its pH is 7.2 (neutral). It contains 5 mg/L of sodium.
San Benedetto is a still and sparkling mineral water from Scorzè, Veneto (Province of Venice), Italy. Its total dissolved solids are 260 mg/L, which is medium minerality. Its pH is 7.45 (hint of sweet). It contains 6.1 mg/L of sodium.
What is the difference between Evian and San Benedetto?
- Evian carries 33% more dissolved minerals than San Benedetto (345 mg/L against 260 mg/L TDS), so it tastes fuller and more mineral.
- Evian is lower in sodium (5 mg/L against 6.1 mg/L).
- Evian is still; San Benedetto is still and sparkling.
- Evian comes from Evian-les-Bains, Haute Savoie, France; San Benedetto comes from Scorzè, Veneto (Province of Venice), Italy.
Evian and San Benedetto side by side
| Analysis | Evian | San Benedetto |
|---|---|---|
| Origin | Evian-les-Bains, Haute Savoie, France | Scorzè, Veneto (Province of Venice), Italy |
| Source | Not published | Not published |
| Source type | Spring | Mineral |
| Carbonation | Still | Still and sparkling |
| pH | 7.2 | 7.45 |
| Total dissolved solids (TDS) | 345 mg/L | 260 mg/L |
| Calcium | 80 mg/L | 51.5 mg/L |
| Magnesium | 26 mg/L | 29.8 mg/L |
| Sodium | 5 mg/L | 6.1 mg/L |
| Potassium | 1 mg/L | 1 mg/L |
| Bicarbonate | 360 mg/L | 293 mg/L |
| Sulfate | 14 mg/L | 4.5 mg/L |
| Chloride | 10 mg/L | 2.7 mg/L |
| Silica | 15 mg/L | 16.7 mg/L |
| Nitrate | 3.8 mg/L | 9 mg/L |
| Minerality class | Medium | Medium |
| pH class | Neutral | Hint of sweet |
| Virginality (sodium) | Good | Good |
| Hardness | Very hard (306.6 mg/L as CaCO₃) | Very hard (250.9 mg/L as CaCO₃) |
| Bottled since | Not published | Not published |
Which one to serve
- Evian sits in the middle and suits most tables.
- San Benedetto sits in the middle and suits most tables.
Evian by the case
San Benedetto by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
Evian
- https://www.evian.com/en_us/what-is-spring-water/water-attributes/ — Brand US site 'evian water attributes' (undated): calcium 80, magnesium 26, potassium 1, bicarbonates 360, silica 15, sulfates 14, chlorides 10 mg/L; 'Dissolved solids at 180°C: 345ppm (mg/L)'. Sodium and nitrate not listed there (existing values not confirmed).
- https://www.evian.com/en_us/faqs/ — Brand FAQ: 'evian's pH is 7.2'; 'Our total dissolved solids are 345 ppm (mg/L)'.
- https://finewaters.com/bottled-waters-of-the-world/france/evian — FineWaters analysis table: all mineral figures, pH, TDS, source type, region/place; FineWaters 'Established' year 1826 (not used for bottled_since). Brand's own site could not be fetched (blocked or no analysis published) unless listed below.
- https://en.wikipedia.org/wiki/Evian — Infobox: Ca 80, Mg 26, Na 6.5, K 1, Cl 6.8, pH 7.2, TDS 300. TDS left null: FineWaters lists 357 mg/l (identical to its bicarbonate figure) vs Wikipedia 300, and brand site was not reachable.
San Benedetto
- https://d1a8krsiuzu13p.cloudfront.net/assets/azienda/Footer_doc/San-Benedetto-bottle-water-quality-report.pdf — Brand's own bottled water quality report (Acqua Minerale San Benedetto S.p.A.): dry residue at 180C 260 mg/l, pH at source 7.45, all ions; source described as artesian wells at 275-310 m in Scorzè. Carbonation value is general brand range, not from this report.















