San Benedetto vs Sant Aniol: Mineral Content, pH and Taste Compared
San Benedetto is a still and sparkling mineral water from Scorzè, Veneto (Province of Venice), Italy. Its total dissolved solids are 260 mg/L, which is medium minerality. Its pH is 7.45 (hint of sweet). It contains 6.1 mg/L of sodium.
Sant Aniol is a still and sparkling well water from Sant Aniol de Finestres (Girona), Catalonia, Spain. Its total dissolved solids are 329 mg/L, which is medium minerality. Its pH is 7.3 (neutral). It contains 7.3 mg/L of sodium.
What is the difference between San Benedetto and Sant Aniol?
- Sant Aniol carries 27% more dissolved minerals than San Benedetto (329 mg/L against 260 mg/L TDS), so it tastes fuller and more mineral.
- San Benedetto is lower in sodium (6.1 mg/L against 7.3 mg/L).
- San Benedetto comes from Scorzè, Veneto (Province of Venice), Italy; Sant Aniol comes from Sant Aniol de Finestres (Girona), Catalonia, Spain.
San Benedetto and Sant Aniol side by side
| Analysis | San Benedetto | Sant Aniol |
|---|---|---|
| Origin | Scorzè, Veneto (Province of Venice), Italy | Sant Aniol de Finestres (Girona), Catalonia, Spain |
| Source | Not published | Not published |
| Source type | Mineral | Well |
| Carbonation | Still and sparkling | Still and sparkling |
| pH | 7.45 | 7.3 |
| Total dissolved solids (TDS) | 260 mg/L | 329 mg/L |
| Calcium | 51.5 mg/L | 91.9 mg/L |
| Magnesium | 29.8 mg/L | 17.5 mg/L |
| Sodium | 6.1 mg/L | 7.3 mg/L |
| Potassium | 1 mg/L | 2 mg/L |
| Bicarbonate | 293 mg/L | 344.4 mg/L |
| Sulfate | 4.5 mg/L | 15 mg/L |
| Chloride | 2.7 mg/L | 6 mg/L |
| Silica | 16.7 mg/L | 11 mg/L |
| Nitrate | 9 mg/L | 2.3 mg/L |
| Minerality class | Medium | Medium |
| pH class | Hint of sweet | Neutral |
| Virginality (sodium) | Good | Acceptable |
| Hardness | Very hard (250.9 mg/L as CaCO₃) | Very hard (301.5 mg/L as CaCO₃) |
| Bottled since | Not published | Not published |
Which one to serve
- San Benedetto sits in the middle and suits most tables.
- Sant Aniol sits in the middle and suits most tables.
San Benedetto by the case
Sant Aniol by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
San Benedetto
- https://d1a8krsiuzu13p.cloudfront.net/assets/azienda/Footer_doc/San-Benedetto-bottle-water-quality-report.pdf — Brand's own bottled water quality report (Acqua Minerale San Benedetto S.p.A.): dry residue at 180C 260 mg/l, pH at source 7.45, all ions; source described as artesian wells at 275-310 m in Scorzè. Carbonation value is general brand range, not from this report.
Sant Aniol
- https://www.santaniol.com/aigua-mineral-origen-volcanic/ — Brand site mineral composition (undated): bicarbonat 344,4 mg/l, calci 91,9, magnesi 17,5, sodi 7,3, 'pH neutre 7,3'; a figure of '313 ml/l a 180º' is printed under the heading 'Conductivitat' and is taken as the dry residue at 180°C. The English page (santaniol.com/en/sant-aniol-water/) prints the same values with sodium rounded to 7. Potassium, sulfate, chloride, silica, nitrate not listed (existing values unconfirmed).
- https://finewaters.com/bottled-waters-of-the-world/spain/sant-aniol — FineWaters analysis table: all mineral figures, pH, TDS, source type, region/place; FineWaters 'Established' year 1993 (not used for bottled_since). Brand's own site could not be fetched (blocked or no analysis published) unless listed below.















