San Benedetto vs Volvic: Mineral Content, pH and Taste Compared
San Benedetto is a still and sparkling mineral water from Scorzè, Veneto (Province of Venice), Italy. Its total dissolved solids are 260 mg/L, which is medium minerality. Its pH is 7.45 (hint of sweet). It contains 6.1 mg/L of sodium.
Volvic is a still mineral water from Chaîne des Puys, Auvergne, France. Its total dissolved solids are 130 mg/L, which is low minerality. Its pH is 7 (neutral). It contains 12 mg/L of sodium. It has been bottled since 1938.
What is the difference between San Benedetto and Volvic?
- San Benedetto carries about 2 times the dissolved minerals of Volvic (260 mg/L against 130 mg/L TDS), so it tastes fuller and more mineral.
- San Benedetto has the higher pH (7.45 against 7), which reads as softer and less sharp.
- San Benedetto is lower in sodium (6.1 mg/L against 12 mg/L).
- San Benedetto is still and sparkling; Volvic is still.
- San Benedetto comes from Scorzè, Veneto (Province of Venice), Italy; Volvic comes from Chaîne des Puys, Auvergne, France.
San Benedetto and Volvic side by side
| Analysis | San Benedetto | Volvic |
|---|---|---|
| Origin | Scorzè, Veneto (Province of Venice), Italy | Chaîne des Puys, Auvergne, France |
| Source | Not published | Not published |
| Source type | Mineral | Mineral |
| Carbonation | Still and sparkling | Still |
| pH | 7.45 | 7 |
| Total dissolved solids (TDS) | 260 mg/L | 130 mg/L |
| Calcium | 51.5 mg/L | 13 mg/L |
| Magnesium | 29.8 mg/L | 9 mg/L |
| Sodium | 6.1 mg/L | 12 mg/L |
| Potassium | 1 mg/L | 7 mg/L |
| Bicarbonate | 293 mg/L | 80 mg/L |
| Sulfate | 4.5 mg/L | 9 mg/L |
| Chloride | 2.7 mg/L | 16 mg/L |
| Silica | 16.7 mg/L | 31 mg/L |
| Nitrate | 9 mg/L | 7.7 mg/L |
| Minerality class | Medium | Low |
| pH class | Hint of sweet | Neutral |
| Virginality (sodium) | Good | Potable |
| Hardness | Very hard (250.9 mg/L as CaCO₃) | Moderately hard (69.4 mg/L as CaCO₃) |
| Bottled since | Not published | 1938 |
Which one to serve
- San Benedetto sits in the middle and suits most tables.
- Volvic is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
San Benedetto by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
San Benedetto
- https://d1a8krsiuzu13p.cloudfront.net/assets/azienda/Footer_doc/San-Benedetto-bottle-water-quality-report.pdf — Brand's own bottled water quality report (Acqua Minerale San Benedetto S.p.A.): dry residue at 180C 260 mg/l, pH at source 7.45, all ions; source described as artesian wells at 275-310 m in Scorzè. Carbonation value is general brand range, not from this report.
Volvic
- https://www.volvic.fr/volvic-l-eau-volcanique/composition.html — Brand composition page (undated); the figures are in an image (https://smartmedia.digital4danone.com/is/image/danonecs/composition-volvic-image), read visually: 80 bicarbonate, 31 silice, 16 chlorures, 13 calcium, 12 sodium, 9 sulfates, 9 magnésium, 7.7 nitrates, 7 potassium (mg/l). Dry residue and pH are not shown (existing values unconfirmed).
- https://en.wikipedia.org/wiki/Volvic_(mineral_water) — Infobox (citing volvic.co.uk): pH 7, Ca 12, Mg 8, K 6, Cl 15, TDS '109 (dry residue 130)' - dry residue used for tds_mg_l; Na given as '12 - 11.6' so left null; 'introduced' 1938. Wikipedia only; brand site not fetched.







