Sant Aniol vs Volvic: Mineral Content, pH and Taste Compared
Sant Aniol is a still and sparkling well water from Sant Aniol de Finestres (Girona), Catalonia, Spain. Its total dissolved solids are 329 mg/L, which is medium minerality. Its pH is 7.3 (neutral). It contains 7.3 mg/L of sodium.
Volvic is a still mineral water from Chaîne des Puys, Auvergne, France. Its total dissolved solids are 130 mg/L, which is low minerality. Its pH is 7 (neutral). It contains 12 mg/L of sodium. It has been bottled since 1938.
What is the difference between Sant Aniol and Volvic?
- Sant Aniol carries about 2.5 times the dissolved minerals of Volvic (329 mg/L against 130 mg/L TDS), so it tastes fuller and more mineral.
- Sant Aniol is lower in sodium (7.3 mg/L against 12 mg/L).
- Sant Aniol is still and sparkling; Volvic is still.
- Sant Aniol comes from Sant Aniol de Finestres (Girona), Catalonia, Spain; Volvic comes from Chaîne des Puys, Auvergne, France.
Sant Aniol and Volvic side by side
| Analysis | Sant Aniol | Volvic |
|---|---|---|
| Origin | Sant Aniol de Finestres (Girona), Catalonia, Spain | Chaîne des Puys, Auvergne, France |
| Source | Not published | Not published |
| Source type | Well | Mineral |
| Carbonation | Still and sparkling | Still |
| pH | 7.3 | 7 |
| Total dissolved solids (TDS) | 329 mg/L | 130 mg/L |
| Calcium | 91.9 mg/L | 13 mg/L |
| Magnesium | 17.5 mg/L | 9 mg/L |
| Sodium | 7.3 mg/L | 12 mg/L |
| Potassium | 2 mg/L | 7 mg/L |
| Bicarbonate | 344.4 mg/L | 80 mg/L |
| Sulfate | 15 mg/L | 9 mg/L |
| Chloride | 6 mg/L | 16 mg/L |
| Silica | 11 mg/L | 31 mg/L |
| Nitrate | 2.3 mg/L | 7.7 mg/L |
| Minerality class | Medium | Low |
| pH class | Neutral | Neutral |
| Virginality (sodium) | Acceptable | Potable |
| Hardness | Very hard (301.5 mg/L as CaCO₃) | Moderately hard (69.4 mg/L as CaCO₃) |
| Bottled since | Not published | 1938 |
Which one to serve
- Sant Aniol sits in the middle and suits most tables.
- Volvic is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
Sant Aniol by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
Sant Aniol
- https://www.santaniol.com/aigua-mineral-origen-volcanic/ — Brand site mineral composition (undated): bicarbonat 344,4 mg/l, calci 91,9, magnesi 17,5, sodi 7,3, 'pH neutre 7,3'; a figure of '313 ml/l a 180º' is printed under the heading 'Conductivitat' and is taken as the dry residue at 180°C. The English page (santaniol.com/en/sant-aniol-water/) prints the same values with sodium rounded to 7. Potassium, sulfate, chloride, silica, nitrate not listed (existing values unconfirmed).
- https://finewaters.com/bottled-waters-of-the-world/spain/sant-aniol — FineWaters analysis table: all mineral figures, pH, TDS, source type, region/place; FineWaters 'Established' year 1993 (not used for bottled_since). Brand's own site could not be fetched (blocked or no analysis published) unless listed below.
Volvic
- https://www.volvic.fr/volvic-l-eau-volcanique/composition.html — Brand composition page (undated); the figures are in an image (https://smartmedia.digital4danone.com/is/image/danonecs/composition-volvic-image), read visually: 80 bicarbonate, 31 silice, 16 chlorures, 13 calcium, 12 sodium, 9 sulfates, 9 magnésium, 7.7 nitrates, 7 potassium (mg/l). Dry residue and pH are not shown (existing values unconfirmed).
- https://en.wikipedia.org/wiki/Volvic_(mineral_water) — Infobox (citing volvic.co.uk): pH 7, Ca 12, Mg 8, K 6, Cl 15, TDS '109 (dry residue 130)' - dry residue used for tds_mg_l; Na given as '12 - 11.6' so left null; 'introduced' 1938. Wikipedia only; brand site not fetched.







