Smeraldina vs Volvic: Mineral Content, pH and Taste Compared
Smeraldina is a water from Sardinia, Italy. Its total dissolved solids are 155 mg/L, which is low minerality. Its pH is 6.59 (acidic). It contains 28.3 mg/L of sodium.
Volvic is a still mineral water from Chaîne des Puys, Auvergne, France. Its total dissolved solids are 130 mg/L, which is low minerality. Its pH is 7 (neutral). It contains 12 mg/L of sodium. It has been bottled since 1938.
What is the difference between Smeraldina and Volvic?
- Smeraldina carries 19% more dissolved minerals than Volvic (155 mg/L against 130 mg/L TDS), so it tastes fuller and more mineral.
- Volvic has the higher pH (7 against 6.59), which reads as softer and less sharp.
- Volvic is lower in sodium (12 mg/L against 28.3 mg/L).
- Smeraldina comes from Sardinia, Italy; Volvic comes from Chaîne des Puys, Auvergne, France.
Smeraldina and Volvic side by side
| Analysis | Smeraldina | Volvic |
|---|---|---|
| Origin | Sardinia, Italy | Chaîne des Puys, Auvergne, France |
| Source | Not published | Not published |
| Source type | Not published | Mineral |
| Carbonation | Not published | Still |
| pH | 6.59 | 7 |
| Total dissolved solids (TDS) | 155 mg/L | 130 mg/L |
| Calcium | 13.8 mg/L | 13 mg/L |
| Magnesium | 6.9 mg/L | 9 mg/L |
| Sodium | 28.3 mg/L | 12 mg/L |
| Potassium | 1.4 mg/L | 7 mg/L |
| Bicarbonate | 53.1 mg/L | 80 mg/L |
| Sulfate | 11.2 mg/L | 9 mg/L |
| Chloride | 49.8 mg/L | 16 mg/L |
| Silica | 18.3 mg/L | 31 mg/L |
| Nitrate | Not published | 7.7 mg/L |
| Minerality class | Low | Low |
| pH class | Acidic | Neutral |
| Virginality (sodium) | Potable | Potable |
| Hardness | Moderately hard (62.8 mg/L as CaCO₃) | Moderately hard (69.4 mg/L as CaCO₃) |
| Bottled since | Not published | 1938 |
Which one to serve
- Smeraldina is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
- Volvic is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
Smeraldina by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
Smeraldina
- https://acquasmeraldina.it/acqua/ — Brand site 'Le caratteristiche di Smeraldina' table, analysis by Università degli studi di Sassari dated 06/06/2023: residuo fisso a 180°C 155 mg/l, pH 6,59, bicarbonati 53,1, sodio 28,3, potassio 1,4, calcio 13,8, magnesio 6,9, cloruri 49,8, solfati 11,2, silice 18,3 mg/l. Nitrate not listed.
- https://kysela.com/smeraldina-still-water.html — Importer page could not be fetched (blocked) and brand domain did not resolve to a brand site; no analysis taken. All figures null.
Volvic
- https://www.volvic.fr/volvic-l-eau-volcanique/composition.html — Brand composition page (undated); the figures are in an image (https://smartmedia.digital4danone.com/is/image/danonecs/composition-volvic-image), read visually: 80 bicarbonate, 31 silice, 16 chlorures, 13 calcium, 12 sodium, 9 sulfates, 9 magnésium, 7.7 nitrates, 7 potassium (mg/l). Dry residue and pH are not shown (existing values unconfirmed).
- https://en.wikipedia.org/wiki/Volvic_(mineral_water) — Infobox (citing volvic.co.uk): pH 7, Ca 12, Mg 8, K 6, Cl 15, TDS '109 (dry residue 130)' - dry residue used for tds_mg_l; Na given as '12 - 11.6' so left null; 'introduced' 1938. Wikipedia only; brand site not fetched.







