Tŷ Nant vs Volvic: Mineral Content, pH and Taste Compared
Tŷ Nant is a still and sparkling artesian water from Bethania, Wales, United Kingdom. Its total dissolved solids are 165 mg/L, which is low minerality. Its pH is 6.8 (neutral). It contains 22 mg/L of sodium.
Volvic is a still mineral water from Chaîne des Puys, Auvergne, France. Its total dissolved solids are 130 mg/L, which is low minerality. Its pH is 7 (neutral). It contains 12 mg/L of sodium. It has been bottled since 1938.
What is the difference between Tŷ Nant and Volvic?
- Tŷ Nant carries 27% more dissolved minerals than Volvic (165 mg/L against 130 mg/L TDS), so it tastes fuller and more mineral.
- Volvic is lower in sodium (12 mg/L against 22 mg/L).
- Tŷ Nant is still and sparkling; Volvic is still.
- Tŷ Nant comes from Bethania, Wales, United Kingdom; Volvic comes from Chaîne des Puys, Auvergne, France.
Tŷ Nant and Volvic side by side
| Analysis | Tŷ Nant | Volvic |
|---|---|---|
| Origin | Bethania, Wales, United Kingdom | Chaîne des Puys, Auvergne, France |
| Source | Not published | Not published |
| Source type | Artesian | Mineral |
| Carbonation | Still and sparkling | Still |
| pH | 6.8 | 7 |
| Total dissolved solids (TDS) | 165 mg/L | 130 mg/L |
| Calcium | 22.5 mg/L | 13 mg/L |
| Magnesium | 11.5 mg/L | 9 mg/L |
| Sodium | 22 mg/L | 12 mg/L |
| Potassium | 1 mg/L | 7 mg/L |
| Bicarbonate | 116 mg/L | 80 mg/L |
| Sulfate | 3.7 mg/L | 9 mg/L |
| Chloride | 14 mg/L | 16 mg/L |
| Silica | 2 mg/L | 31 mg/L |
| Nitrate | 0.1 mg/L | 7.7 mg/L |
| Minerality class | Low | Low |
| pH class | Neutral | Neutral |
| Virginality (sodium) | Potable | Potable |
| Hardness | Moderately hard (103.4 mg/L as CaCO₃) | Moderately hard (69.4 mg/L as CaCO₃) |
| Bottled since | Not published | 1938 |
Which one to serve
- Tŷ Nant is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
- Volvic is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
Tŷ Nant by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
Tŷ Nant
- https://tynant.com/water-analysis/ — Brand 'Typical Analysis' for Tŷ Nant (undated): Ca 22.5, Mg 11.5, Na 22.0, K 1.0, Fe 0.002, Cl 14.0, SO4 3.7, NO3 <0.1, F 0.148 mg/l, pH 6.80, dry residue at 180°C 165 mg/l. Bicarbonate and silica are not listed for Tŷ Nant (existing values unconfirmed); nitrate is '<0.1', existing 0.1 left as is.
- https://finewaters.com/bottled-waters-of-the-world/uk/ty-nant — FineWaters analysis table: all mineral figures, pH, TDS, source type, region/place. Brand's own site could not be fetched (blocked or no analysis published) unless listed below.
Volvic
- https://www.volvic.fr/volvic-l-eau-volcanique/composition.html — Brand composition page (undated); the figures are in an image (https://smartmedia.digital4danone.com/is/image/danonecs/composition-volvic-image), read visually: 80 bicarbonate, 31 silice, 16 chlorures, 13 calcium, 12 sodium, 9 sulfates, 9 magnésium, 7.7 nitrates, 7 potassium (mg/l). Dry residue and pH are not shown (existing values unconfirmed).
- https://en.wikipedia.org/wiki/Volvic_(mineral_water) — Infobox (citing volvic.co.uk): pH 7, Ca 12, Mg 8, K 6, Cl 15, TDS '109 (dry residue 130)' - dry residue used for tds_mg_l; Na given as '12 - 11.6' so left null; 'introduced' 1938. Wikipedia only; brand site not fetched.


