Vellamo vs Volvic: Mineral Content, pH and Taste Compared
Vellamo is a still spring water from Viikinäinen, Päijät-häme, Heinola, Finland. Its total dissolved solids are 519 mg/L, which is medium minerality. Its pH is 8.3 (alkaline). It contains 85 mg/L of sodium.
Volvic is a still mineral water from Chaîne des Puys, Auvergne, France. Its total dissolved solids are 130 mg/L, which is low minerality. Its pH is 7 (neutral). It contains 12 mg/L of sodium. It has been bottled since 1938.
What is the difference between Vellamo and Volvic?
- Vellamo carries about 4 times the dissolved minerals of Volvic (519 mg/L against 130 mg/L TDS), so it tastes fuller and more mineral.
- Vellamo has the higher pH (8.3 against 7), which reads as softer and less sharp.
- Volvic is lower in sodium (12 mg/L against 85 mg/L).
- Vellamo comes from Viikinäinen, Päijät-häme, Heinola, Finland; Volvic comes from Chaîne des Puys, Auvergne, France.
Vellamo and Volvic side by side
| Analysis | Vellamo | Volvic |
|---|---|---|
| Origin | Viikinäinen, Päijät-häme, Heinola, Finland | Chaîne des Puys, Auvergne, France |
| Source | Not published | Not published |
| Source type | Spring | Mineral |
| Carbonation | Still | Still |
| pH | 8.3 | 7 |
| Total dissolved solids (TDS) | 519 mg/L | 130 mg/L |
| Calcium | 51 mg/L | 13 mg/L |
| Magnesium | 13 mg/L | 9 mg/L |
| Sodium | 85 mg/L | 12 mg/L |
| Potassium | 4 mg/L | 7 mg/L |
| Bicarbonate | 210 mg/L | 80 mg/L |
| Sulfate | 27 mg/L | 9 mg/L |
| Chloride | 110 mg/L | 16 mg/L |
| Silica | 14 mg/L | 31 mg/L |
| Nitrate | Not published | 7.7 mg/L |
| Minerality class | Medium | Low |
| pH class | Alkaline | Neutral |
| Virginality (sodium) | Potable | Potable |
| Hardness | Very hard (180.8 mg/L as CaCO₃) | Moderately hard (69.4 mg/L as CaCO₃) |
| Bottled since | Not published | 1938 |
Which one to serve
- Vellamo sits in the middle and suits most tables.
- Volvic is light enough for delicate food: raw fish, fresh cheese, steamed vegetables and white wine.
Vellamo by the case
Sources
Every figure on this page is taken from the pages below. A figure nobody has published is shown as “Not published” rather than estimated. Mineral content varies slightly between bottlings.
Vellamo
- https://vellamo.com/mineral-water/ — Brand page for Vellamo still natural mineral water (undated; links a 2026 CA water quality report): TDS 519 mg/l, hardness 180, nitrate <1, sodium 85, pH 8.3, silica 14, bicarbonate 210, sulfate 27, chloride 110, calcium 51, magnesium 13, potassium 4 mg/l. The sparkling version lists pH 5.4 with the same minerals.
- https://finewaters.com/bottled-waters-of-the-world/finland/vellamo — FineWaters analysis table: all mineral figures, pH, TDS, source type, region/place; FineWaters 'Established' year 2017 (1990) (not used for bottled_since). Brand's own site could not be fetched (blocked or no analysis published) unless listed below.
Volvic
- https://www.volvic.fr/volvic-l-eau-volcanique/composition.html — Brand composition page (undated); the figures are in an image (https://smartmedia.digital4danone.com/is/image/danonecs/composition-volvic-image), read visually: 80 bicarbonate, 31 silice, 16 chlorures, 13 calcium, 12 sodium, 9 sulfates, 9 magnésium, 7.7 nitrates, 7 potassium (mg/l). Dry residue and pH are not shown (existing values unconfirmed).
- https://en.wikipedia.org/wiki/Volvic_(mineral_water) — Infobox (citing volvic.co.uk): pH 7, Ca 12, Mg 8, K 6, Cl 15, TDS '109 (dry residue 130)' - dry residue used for tds_mg_l; Na given as '12 - 11.6' so left null; 'introduced' 1938. Wikipedia only; brand site not fetched.

